Home |  About |  AO Community |  Ordering & Returns |  Store Location |  Enquiries |  Site Map |  Cookies |  
Basket   View Cart  | Checkout 
 
 

Climbing | Hardware | Belay Devices


 Click image to enlarge

Visit the Petzl Website
Petzl Unireverso Belay Device
Product Code D18AT R



40.00


Qty  
<< PREVIOUS PAGE  CHECKOUT NOW >>    


PETZL UNIREVERSO

Belay system that combines a Petzl Reverso 4 and a Petzl Attache Karabiner



The Petzl Unireverso is a complete and lightweight belay system that is particularly practical to use and effective on all rope diameters. This system is composed of a Petzl Reverso 4 belay device and a Petzl Attache locking karabiner, held in optimal position by a sliding link. The unit is loss-resistant and reliable. This belay-rappel system is versatile and allows adapted braking.


  • Entire unit is loss-resistant and reliable:
    • limits the risk of dropping the belay device during rope maneuvers
    • allows the REVERSO 4 belay device to remain in correct position and the ATTACHE carabiner to be loaded on its major axis
  • A single device for all uses:
    • effective braking on ≥ 8 mm half ropes and ≥ 7.5 mm twin ropes, and on ≥ 8.9 mm single ropes
    • belay a leader, or one or two second climbers, and rappel
    • independent, simultaneous belay of two seconds in Reverso mode
    • quick changeovers from Reverso mode to belaying the leader for a party of 2 climbing a multi-pitch route
  • Adapted braking:
    • increases the braking action on thinner ropes and adapts it to thicker ropes, thanks to its V-shaped friction channel
    • increases the braking pressure on the ropes in Reverso mode
    • the asymmetrical lateral grooves help to increase the braking action when the rope enters the device (fall, top rope, rappel), and the fluidity when the rope exits the belay device (taking in slack)
  • Rope friendly, allows for smooth belaying and rope handling:
    • will not kink the ropes regardless of the mode used
    • separates the two strands of rope when belaying and rappelling on two ropes
    • hole for releasing the device under load: allows a loaded device in Reverso mode to be easily and gradually released with only a carabiner
  • Intuitive use:
  • easy and quick installation of the rope
  • system is easily reversed (right/left)
  • reduced risk of being burnt by the belay device when removing it from the rope

<< PREVIOUS PAGE
Bookmark and Share

Action Outdoors, 3 Great Colman Street, Ipswich, Suffolk, , IP4 2AA | T:01473 211647 | E: info@actionoutdoors.co.uk  

 Copyright ©Action Outdoors  V2.8