Home |  About |  AO Community |  Ordering & Returns |  Store Location |  Enquiries |  Site Map |  Cookies |  
Basket   View Cart  | Checkout 

Climbing | Hardware | Screw-Gate Karabiners

 Click image to enlarge

Visit the DMM Website
DMM Belay Master 2
Product Code A872



A few alterations to the profile were necessary to finalise the overall shape of the basket of the DMM Belay Master 2 and also to perfect the recess the clip fits into. The result is a piece of engineering beauty that offers a neat solution to a very real problem/danger. The clip can only be locked into place when the gate thimble has been tightened into the locked position. This acts as a double check that the biner is closed correctly and securely, and the plastic clip itself prevents the biner from being cross-loaded in action. Note: the Belay Master should never be used without the Clip in place.

There is another small but very important development with this carabiner - one that will, in time, benefit all our locking biner range. The keylock nose has been developed further so that the profile is flared and tapered. The result is a wider cross-section which allows greater side loading and push in strengths than ever before. The thimble or barrel of the auto-locking gate has a greater surface cross-sectional area of contact with the gate when loaded from any direction. Taper Lock&trade; Patent Pending system is a major step forward in the safety of locking carabiners.

  • I Beam back construction
  • Clean nose
  • Plastic clip prevents cross-loading
  • Taper Lock™ Patent Pending nose
  • Weight: 93g
  • Strength (gate closed): 27kN
  • Strength (gate open): 8kN
  • Strength (minor axis): 10kN
  • Gate Opening: 20mm
  • Rope Bearing Surface Width: 10.9mm
Bookmark and Share

Action Outdoors, 3 Great Colman Street, Ipswich, Suffolk, , IP4 2AA | T:01473 211647 | E: info@actionoutdoors.co.uk  

 Copyright ©Action Outdoors  V2.8.1